Skrá þessi er af Wikimedia Commons, og deilt meðal annarra verkefna og nýtist því þar.
Hér fyrir neðan er afrit af skráarsíðunni þar.
Lýsing
LýsingUV effect on finished wood.jpg
A 1" x 3" x 7" pine board, finished with a UV cure resin (not sanded), then exposed to various time exposures of UVA (primarily 370nm +/-10nm, less than 3% UVB at 312-315nm). Left side was exposed 43 hours, center band was shielded and received no UVA except to cure the finish, the right side was exposed for 20 hours. Exposure done with 4 SunMaster Curall UV resin curing lamp (F32T8 reflector lamp powered at 50 watts. Total UV at surface (as measured with a UVA/B meter) was approximately 15 mW/cm2 for the duration of the tests. Demonstrates the effects of ultraviolet on finished wood surfaces.
tilvísun höfundarréttar – Þú verður að tilgreina viðurkenningu á höfundarréttindum, gefa upp tengil á notkunarleyfið og gefa til kynna ef breytingar hafa verið gerðar. Þú getur gert þetta á einhvern ásættanlegan máta, en ekki á nokkurn þann hátt sem bendi til þess að leyfisveitandinn styðji þig eða notkun þína á verkinu.
Deila eins – Ef þú breytir, yfirfærir eða byggir á þessu efni, þá mátt þú eingöngu dreifa því verki með sama eða svipuðu leyfi og upprunalega verkið er með.
Gefið er leyfi til að afrita, dreifa og/eða breyta þessu skjali samkvæmt Frjálsa GNU Free Documentation License, útgáfu 1.2 eða nýrri, sem gefið er út af Frjálsu hugbúnaðarstofnuninni með engum breytingum þar á. Afrit af leyfinu er innifalið í kaflanum GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
Þú mátt velja notkunarleyfi að eigin vali.
Captions
Add a one-line explanation of what this file represents
{{Information |Description=A 1" x 3" x 7" pine board, finished with a UV cure resin (not sanded), then exposed to various time exposures of UVA (primarily 370nm +/-10nm, less than 3% UVB at 312-315nm). Left side was exposed 43 hours, center band was s...